Activity
 
diyman
diyman
Group: Registered
Joined: January 29, 2018
Eminent Member
2
Here is the public project: And I attached the gerber fil...

In forum External GPU Builds

9 months ago
mariscolarry The factory PCB must be remove, otherwise it w...

In forum External GPU Builds

9 months ago
This result was on external display. My primary eGPU card i...

In forum External GPU Builds

11 months ago
The result ~320MB/s in CUDA-Z (tested with 9600GT). Fortuna...

In forum External GPU Builds

12 months ago
Version C is hopefully stable (only with custom PCB). Wait ...

In forum External GPU Builds

12 months ago
Yes, this is version C. Jero was the first what designed a ...

In forum External GPU Builds

12 months ago
It will probably be a stability problem. Unfortunately, whe...

In forum External GPU Builds

1 year ago
I guess what the problem is. The drawing is not clear and th...

In forum External GPU Builds

1 year ago
I think the coax cable's core is too big for soldering. I u...

In forum External GPU Builds

1 year ago
Gen2 signal is sensitive to electromagnetic noise. Your atta...

In forum External GPU Builds

1 year ago
I think it is yes. Components have come to me, I plan to mod...

In forum External GPU Builds

1 year ago
Thank you for the photos. Here are the drawings, you're mak...

In forum External GPU Builds

1 year ago
What kind of connector do you want to convert ExpressCard? ...

In forum External GPU Builds

1 year ago
I see the mistake. The USB GND is not the ExpressCard's GND...

In forum External GPU Builds

1 year ago
mPCIe have PERST pin, but if you use USB 3.0 Type-A connecto...

In forum External GPU Builds

1 year ago
Lazze93 I suggest that the mode in BIOS be set to UEF...

In forum External GPU Builds

1 year ago
I know the phenomenon unfortunately. Slowness of the system...

In forum External GPU Builds

1 year ago
I resoldered my ExpressCard -> mini-B USB (on the mPCIe P...

In forum External GPU Builds

1 year ago
It looks very good, thank you! Yeah, that's a little wron...

In forum External GPU Builds

1 year ago
Hi! I'm sorry to answer you late. The R2 bridge is not imp...

In forum External GPU Builds

1 year ago
Very nice job! Where did you make the PCB? Can you send a l...

In forum External GPU Builds

1 year ago
Very nice, congratulation! 🙂 If you can make it, make...

In forum External GPU Builds

1 year ago
Unfortunately, I did not have the opportunity to test the re...

In forum External GPU Builds

2 years ago
I added GTX 560 results and V2 solutions - May 18, 2108

In forum External GPU Builds

2 years ago
Please note that my message is always reply to quoted messag...

In forum External GPU Builds

2 years ago
I do not think this is worth it. I think the drawing is und...

In forum External GPU Builds

2 years ago
Thanks! 🙂

In forum External GPU Builds

2 years ago
I did not want to Type-A usb to use for connector on the lap...

In forum External GPU Builds

2 years ago
The wake pin is optional, this can the pcie device awake fro...

In forum External GPU Builds

2 years ago
Your mpcie adapter with green PCB, only a mPCI-e to USB adat...

In forum External GPU Builds

2 years ago
I added changelog.

In forum External GPU Builds

2 years ago
I added the drawing, I hope to help you with the project I ...

In forum External GPU Builds

2 years ago
All right, I will attach a drawing, into the implementation ...

In forum External GPU Builds

2 years ago
You're right. I will improve later. I wanted to reduce the...

In forum External GPU Builds

2 years ago
2012 14" HP Elitebook 8470P + GTX560/[email protected] (PCE16...

In forum External GPU Builds

2 years ago
My config: – HP 8470p (half size WLAN + full size WWAN mPCI...

In forum Expresscard, mPCIe, M.2 eGPU

2 years ago