2016 15" MacBook Pro (RP460) [6th,4C,H] + GTX 1080 @ 32Gbps-TB3 (AKiTiO Node) + macOS 10.12 & Win10 [ryokun6]
After multiple trials and errors, I managed to get the setup working on macOS and on Windows with accelerated internal display via Nvidia Optimus.
To get Optimus working on Windows, the key is to keep integrated graphics enabled and disable Radeon 460 to prevent code 12 error. Here are the steps:
- Uninstall Radeon drivers with DDU. This is required because Radeon driver interferes with integrated graphics and will cause following step to fail.
- Enable integrated graphics with apple_set_os.efi. Install reFind and copy the efi file to /Volumes/ESP/EFI/custom. From now on, always run apple_set_os.efi before booting to Windows.
- You should see two display adapters in device manager. Install Intel 530 Graphics Driver.
- Install vcredist_x86, then run gpu-switch integrated.bat with Admin privileges, it will make the internal display to use integrated graphics on reboot.
- Restart with eGPU plugged in. You should see your eGPU in device manager. Install Nvidia drivers.
- Restart with apple_set_os.efi with eGPU plugged in. Your eGPU should be recognized but with code 12 error. I fixed this by disabling the PCIe x16 bridge that hosts the Radeon 460. There are other ways to fix it but are more complicated and risky. Do this by going to Device Manager->View->Devices by connection. Find your Radeon RPxx dGPU. Directly above it will be a PCI Express Port. Right click, then disable it to free up resources for the eGPU to use.
- Run gpu-switch again then restart with eGPU plugged in. Your eGPU and integrated graphics should be working and the eGPU will accelerate graphic intensive applications. 🎉🎉🎉
- Important‼️: If you want to boot into macOS, before restarting always re-enable the PCIe x16 bridge. macOS will reroute the internal display to Radeon, if you disabled Radeon or the PCIe bridge hosting it in Windows, this will cause the next boot to hang.
Thank you! Awesome guide Will try it out.
Thank you for the comprehensive guide. I will most likely try this with the Node and a 1060. I will be doing this on my MB Pro 2016 RP 450.
I have one question. When you uninstall the Radeon driver using DDU, does this mean that I cannot use the RP450 when I'm on the go? I like to play games once in a while (in windows) when I'm on the go, so I was just wondering If i did this procedure, would my RP 450 be disable for long term
Thanks again. I will probably try these steps and let you know how it goes!
Very new to the eGPU game here so apologies in advance for the question. Would this method have to be applied for the 13" MacBook Pro with touch bar as well? The reason I ask is that it only has Intel dedicated graphics. Thanks!
Very new to the eGPU game here so apologies in advance for the question. Would this method have to be applied for the 13″ MacBook Pro with touch bar as well? The reason I ask is that it only has Intel dedicated graphics. Thanks!
Similar, but easier. Pls peruse an implementation guide for your iGPU-only system which is simpler:
Thanks for the awesome guide, I had the same macbook pro and 980ti thus I purchased the Akitio Node. I got stuck with code 12 following your guide as I don't know which device to disable to free up the resource.
Could you please post on which device you disabled to resolve the code 12? I have managed getting intel 530 in the device manager and working.
@Jerry1394, in Windows go to Device Manager->View->Devices by connection. Find your Radeon RPxx dGPU. Directly above it will be a PCI Express Port. Right click, then disable it to free up resources for the eGPU to use.
Thank you for the timely reply, really appriciate it
I was on the road and just got home. I did as you descirbed and there is something hanppening: I saw my 980ti icon restore to nomarl version (without the warning sign indicating error 12). Before I declare victory the screen become totally blue with write horizental strips. I did every step faithfully and I suspect the port I am using. I am changing the port of egpu from far right to close left. Do you mind telling me what's your port of a successful setup?
After fiddling with all the possible solutions to fix error 12 I also ended up doing this strategy.
Plug in eGPU
Install Nvidia drivers
Disable AMD Graphic
Run integrated.bat (to allow Windows to use Intel GPU after reboot)
Boot Windows with set_apple.efi so the Macbook doesn't shut down the Intel GPU
Install Intel drivers
In the end you want a setup where the dGPU is disabled because it draws to much memory and let the internal GPU power the macbook LCD and the eGPU to power the external monitor.
In my opinion, this is by far the easiest solution.
Disabling the PCI express port appears to make USB 3+ not work. Anybody had a similar issue?
Just picking up my Node + 1080ti and perusing these instructions before the hardware arrives. Thanks for the great write up!
Do you have to re-run gpu_switch everytime you disconnect your eGPU and take your macbook out? Or is it a one-time thing and Optimus just handles everything properly thereafter, even in the absence of a connected eGPU?
Thanks ryokun6 for the write-up. Similarly with trial and error I have it almost there. My current hiccup is I see error code 43 and the eGPU is disabled. Using NVIDIA drivers 384.76. In my research, other people with code 43 error got past it with installing older drivers but the ones they are using don't have 1080ti support. Any thoughts on how to get past code 43?
Hey all, I am also having this issue- specifically if I plug in a samsung t3 ssd drive it causes the entire os to crash immediately. Any ideas?
Hi everyone, sorry if this question will look dumb, but I'm stuck at the step where I'm installing Intel drivers. Basically, installation fails with "System didn't meet minimal requirements" message. I kind of expected this (because of Bootcamp), but was hoping that it should go smooth since there are no complaints about it. Anyone has any guesses how this could be addressed?
This is the only one that can get me going on 10.13.1 +. Thanks so much...