I see the driver update, immediately go to the installation!
step:
1.install Thunderbolt 3 enabler
2.
1) Download the script on your desktop:
curl -o ~/Desktop/automate-eGPU.sh https://raw.githubusercontent.com/goalque/automate-eGPU/master/automate-eGPU.sh
2) chmod +x ~/Desktop/automate-eGPU.sh
3) cd ~/Desktop
4) sudo ./automate-eGPU.sh
5)sudo ./automate-eGPU.sh -a
3. Restart the Mac
finish!!
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
Hello, guy! I have the same card and the same model as your's. However, I was deal with AKiTio Node. Need I install Thunderbolt 3 enabler?
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
Hello, guy! I have the same card and the same model as your's. However, I was deal with AKiTio Node. Need I install Thunderbolt 3 enabler?
You don't need TB3-enabler. The AKiTiO Node uses TI83 controller which is compatible with macOS. Your Node firmware 21.1 may be the culprit. Update the Node's firmware first then run automate-eGPU script.
I have 15″ MBPtb with RP460 | Razer Core | GTX 1080. I did TB3 enabler and automate-eGPU script. automate-eGPU detected the GTX1080 and installed 378 webdriver. I reboot after running the script but MacOS is not detecting the GPU. What am I doing wrong?
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
hi, we have the same setup! Do you get the eGPU recognized every time you unplug and plug again? Sometimes I have problems to get it recognized by the system, I need to turn off again, unplug power adapter and reconnect Thunder 3....
i will post a new implementation when I will receive my Mantiz Venus, but I'mm already sporting a 1070 in my Thunder 3
any benchmark from you?
MacBook Pro 2018 Touch Bar i7 quad-core 2.7Ghz - 16GB RAM - 512GB PCIe SSD
my Mantiz Venus extreme mod with Sapphire Nitro+ RX Vega 64
I have 15″ MBPtb with RP460 | Razer Core | GTX 1080. I did TB3 enabler and automate-eGPU script. automate-eGPU detected the GTX1080 and installed 378 webdriver. I reboot after running the script but MacOS is not detecting the GPU. What am I doing wrong?
I now also encountered the same problem, I can use the first time, then I can not use after the unplugged, and is not detected eGPU..
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
hi, we have the same setup! Do you get the eGPU recognized every time you unplug and plug again? Sometimes I have
problems to get it recognized by the system, I need to turn off again, unplug power adapter and reconnect Thunder 3....
i will post a new implementation when I will receive my Mantiz Venus, but I'mm already sporting a 1070 in my Thunder 3
any benchmark from you?
I have a problem, I now do a lot of attempts can not connect to eGPU.
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
hi, we have the same setup! Do you get the eGPU recognized every time you unplug and plug again? Sometimes I have
problems to get it recognized by the system, I need to turn off again, unplug power adapter and reconnect Thunder 3....
i will post a new implementation when I will receive my Mantiz Venus, but I'mm already sporting a 1070 in my Thunder 3
any benchmark from you?
I have a problem, I now do a lot of attempts can not connect to eGPU.
My theory is this is caused by 15W power delivery… when i will receive my Mantiz Venus (which can charge 87W) i will have the answer. I've noticed the best way is to turn off the computer entirely and stay in efi screen (alt key) since the GFX card power up. I can boot most times usually. Let me know.
MacBook Pro 2018 Touch Bar i7 quad-core 2.7Ghz - 16GB RAM - 512GB PCIe SSD
my Mantiz Venus extreme mod with Sapphire Nitro+ RX Vega 64
I have 15″ MBPtb with RP460 | Razer Core | GTX 1080. I did TB3 enabler and automate-eGPU script. automate-eGPU detected the GTX1080 and installed 378 webdriver. I reboot after running the script but MacOS is not detecting the GPU. What am I doing wrong?
Same setup here using 1080ti, never had it work on external or internal displays
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
I have 15″ MBPtb with RP460 | Razer Core | GTX 1080. I did TB3 enabler and automate-eGPU script. automate-eGPU detected the GTX1080 and installed 378 webdriver. I reboot after running the script but MacOS is not detecting the GPU. What am I doing wrong?
Same setup here using 1080ti, never had it work on external or internal displays
i can use it again...I don't know what happen..I just install again
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
hi, we have the same setup! Do you get the eGPU recognized every time you unplug and plug again? Sometimes I have
problems to get it recognized by the system, I need to turn off again, unplug power adapter and reconnect Thunder 3....
i will post a new implementation when I will receive my Mantiz Venus, but I'mm already sporting a 1070 in my Thunder 3
any benchmark from you?
I have a problem, I now do a lot of attempts can not connect to eGPU.
My theory is this is caused by 15W power delivery… when i will receive my Mantiz Venus (which can charge 87W) i will have the answer. I've noticed the best way is to turn off the computer entirely and stay in efi screen (alt key) since the GFX card power up. I can boot most times usually. Let me know.
i can use it again…I don’t know what happen..I just install again
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts
hmm I'll try a few more times with that
Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts