Setup & Software Discussions
2018 15" HP Spectre X360 (VegaMGL) [8th,4C,G] + RTX 2070 @ 32Gbps-TB3 (VisionTek...
 

2018 15" HP Spectre X360 (VegaMGL) [8th,4C,G] + RTX 2070 @ 32Gbps-TB3 (VisionTek 900998) + Win10 [Akiyam]  

  RSS

(@akiyam)
New Member
Joined: 11 months ago
 

System specs

  • HP Spectre X360 15-ch0XX
  • Intel I7-8705G 3,10 GHz turbo 4,1 GHz
  • 16 GB DDR4 Kingston hyper x 2400MHz CL14
  • Samsung PM981 - 512 GB SSD M.2 - MZVB512HAJQ-000H1
  • Windows 10 Home
  • 2 x Thunderbolt 3
  • 1 x USB 3.0
  • 1 x HDMI
  • SD card reader
  • 1 x Headset 3,5 mm line in and out
  • Radeon RX Vega M GL Graphics - 4 GB
  • Intel(R) HD Graphics 630
  • Laptop display: 15" 4K touch with gorilla class - Resolution: 3840 x 2160 - 59 Hz

eGPU hardware 

  • VisioTek 900998 -( https://www.visiontek.com/tb3-external-graphics-accelerator.html )
  • FSP group FSP550-50SGGBA - 550 W SFX PSU (same as: Silverstone SX550 SFX) 
  • Gainward Gmbh GeForce RTX 2070 Phoenix GS - 8 GB 
  • NeoFroza Zion - NFS01 - 1Tb SSD
  • Choetech 2 m long Certified Thunderbolt 3 100 W cable
  • Choetech 2 m long USB Type C Male to HDMI Connector 4K 60 Hz Cable
  • External display - Fujitsu SL27T-1 LED 1920×1200 60 Hz 8-Bit external display

Hardware pictures 

https://lh3.googleusercontent.com/r0P6xw9CEkKW_fxwU4l5jhx5rCkNs6sKsKqU0NRZ0Dd39wIzqVJs8_TqfSHKMM-8ZD3GtFpmTd3ucG_W3fqFenNyL6qaCSmbSmahfpDmvPTbivr1qoWT1h00xcqO0CRYr0TnAlDROQikR4f3zLYh-LiHeWhipC3-6urh9KluPvbNpXUFMilEsz89PAAg6e92hz5gghma_bfLFMWHWIFYQhm6-f_0PUKqX0dJ7123CshsXXTUm2L323f_rWlSPdMYLVKfMoE3Bt3N4qeei8dTNFvl41oeyZNcmwS1H7TbVZxalopi8x0NPAxrkTQxanbCBtNKUFmIAlrvTsbhznQPbGjWMRPeDA4swpXRX4rPnBySLFyLV8QFyovTApNd5Np2g-IS7LStldScfipxe0T8xFDXo10b2D8gOwoum5KJ8mYLZ2Ks71DdB7mis8vUR-Dl81lUu-gAKDa7FBI-48gKxaSVqYkV-K0FGyFcbm1N1smY_me1OcCbeZqDd1NeMdp8alLUYH4WmsnjrdX9YGOdeCch0bgPnb10byifbWBgYytUmpp6e3JW2oflK2DxpStXFQY0OEEpr7woo1A0EKG3skVtoOyUN8gPgcQHaY9EOOUSNBfvJTbKNQ0YHFM7-8b74zkkH1a10R5bEMy-g44C184HEA=w1739-h978-no

https://lh3.googleusercontent.com/VbMPZB_kanmOrEycSUTdSQI5L_oeAXxTbr-0T-eG3ZODgQ6_pWnyL2FP81mIrWTz5Hyd9qjuKSmC34_YECOQOcjxgMFOvwwqpPjSm-9lINd4QPXg-aB08nRM7YCspNikJttSpD2CjA9MiAPYeNNFMrZ_mUcoGgcQecOyewJ_aUjNUl0sjkOZUCBXlR4yIZoVaNFz9DvXpWp5p9aq9p4d0jAH-fTY6btnNM6W9hJOwuq_ZxK8rpiIkIKC-_Vyfl2n_43Mkwq0sfeJGhjdLPgIT7mZccPgsAIbW_bM7FnXECfgIsGJMsxnHtS_kFA9E8HXJESwgZ_wsUyHBnFWMMWXJSz9BIIE5YxtIc0WHCOfDDE7Nwtfe5kJGs76gNTKa7bQf8U5iOmCsNVL7k0_KOsO--JloMysPps2G3WCdFmjmdRKJbnG6mB1EEaZnJu9yDJQV8nO9RP3-7OiFiB4P2HxIqzqO3ghwDPUskVPMcb1yObuRltdJUdLwvJM6OMrWRRRvA6AIHUsRIVy7q0UumD_T6fdLQ9U2H5ASJ7lKAoT4E4uzHlWBAH749dQoeBo1WzlHqIDia5O1CuXJQKHx3ZwEEzecxtlyrWRe1BfA2WgFGzAEyqC7QexgNq_x-efy1wRygAXiBl4-3G2ene8lFRAI_xl4w=w1739-h978-no

https://lh3.googleusercontent.com/uhiH3lyIuD9nuz2Cx-O44V4HT4BcHSO28jj5OAO2fMW3bENsjP-rXXVLX5i-ZqxEijU-lNsc1jOgsqMbE2tQCFaO4_WJuniqXgmJekM3xXpZy0bAvjxKDIHtYoJ5qofNPK2YCGbSM20FYBB9NhiMDRSvSmtau95wPvL_cgONaFH3vWHPW-DNlW69JxVO679H3u8Kbn4u-vpuHbtYZvqQ6-6lZHKAbsvEmBPCR_2L4xenQRU4NFNMUL_Ss-fyOLBkgHQZj-vUxNrtiz01avuI1nx0Q-mEHnPqJAtsEbGkgCBB99YHsXMZ4x6J7urrhBQkHn_gIJJut3FMGxXVmHZjoN4RusxVoF5-f5SGpHTeFYcy2WGPvO6and7QTn98i36897NhbtMIOsbcf5ygyapPzuXWZi0UxDZ9P7oQ8OSbXOpBq9N4wctkoSt3LnLZL5y3ZJ8Lw-QrVmsS9geO3D9HuuCCERtYL9QcSJ4pgBUcU2rpunfyv8FoEzVyYfEXI32jqUdjFirSLq5Q0qeTtVoQy4OjL5mSinIUDZclVZI-ySeu_p6plaqQdSRB17mQvNSaUXqBYyUhCtWk6ZU-Qcm3XqMChDXdyRKivLPFj5RjxEiA1wW7QguLvvNAEvfJ62PPQWvLY4UxNBibEYkBptmE0L8Pjg=w1739-h978-no

https://lh3.googleusercontent.com/KWr_pr52sVBxM0llauDy4ayBaoSCQk9HoFWlTFYJRJ-vXOxadmdqEsakbGb1Pgv5pmlr9BYA1kkqbn6cJidI0h0QweVYxoxtjfpBmbjAzzx0JQc7LtmJzpw9UgMOIbW_GMYoQ_6mwbXcURQj2nlf0ebSYJPtZ3AqQQtvOtFkEydfLJOJAkWcsi-Ej1ADCIurb00ZvkaFT-2vepcgqdAPgfmztW_WTIGfW77PO99bZr0OhKyfvrQQuWd78EDPyOgyg5Xj7rLrnwRZ2Qh-u8L6piVggCVoCHpRttEuqbzqfsJeb8Y6oB6DutKCIcbX8g0ByHfoqSRBaALOl6qKSCiSToIpDVDUzTVGMcr_iFk4xZ2339j4L-TxmQI0iUg5xCwqs5Zg9g7GpJ1AYauXAibdWEFOm1BRmmqQaEgnel-XHPQkt1D32VQA9Q8rToQpv14nSFF_uM_IhtBCE7cwh4DKWNJQpi1vSu5z5bREYqcvwi9dwT5NDVL2_KlMSvZfYyJmelkaQedZKxcUVbFX_Igj5U0bItqqbFFziDxt2jxnbXX1GNkXQUE8_F7hOvyggt1ShkzFhJ1j5iabLG0NBgdDRofctFeGzDgLRNbQR5rB5P6gILN2z2gZbWnP5se_fKaxI2ne2fyQdicx4qt36sr6bvnnwg=w1739-h978-no

Installation steps

1. Open both Covers with small Torx screwdriver
2. Connect SATA cable
3. install SSD to holder and attach it to like in the picture below

4. Install graphics card and lock it with bracket (pink in the picture above)
5. Close enclosure with the 4 screws
6. Remember to check all screws that they are tight its look bad if you don't put cover screws tight enough
7. Connect cables, install drivers and ready to use
8. If you are using SSD or HDD inside of the enclosure remember to make new partition in the Windows 😉 (  )

Benchmarks 

3D mark Time spy 1.0 - 6744 (  https://www.3dmark.com/spy/5506595 ) - I was use 8 Gb RAM in this test

Comments

I am very satisfied to this configuration now I have very powerful and handy ultra book with long battery life 9 - 12 h when I travel. When I am on home i have desktop computer to play and make CAD models, it is also pretty handy have 1 Tb more space to games and stuff. I successfully played Skyrim special edition ultra high graphics over the Thunderbolt 3. Next I try to play OverWatch from external SSD + plug RJ45 to box trying to test how much TB3 bus can take.

This topic was modified 3 months ago

"Trying new things makes you more even more engineer"


nando4 and itsage liked
ReplyQuote
itsage
(@itsage)
Famed Member Admin
Joined: 3 years ago
 

Nice mod to add the SSD to expansion board. This eGPU enclosure shares the same main board with Mantiz Venus so the SATA port was there but unpopulated. Enjoy your setup!

Best ultrabooks for eGPU use | eGPU enclosure buying guide


ReplyQuote
jerry Kansai
(@joi_kansai)
Estimable Member
Joined: 2 years ago
 

Greetings @Akiyam did you delete 3Dmark timespy link? Would be nice if you upload it again.

Razer Blade 15 2018, i7 8750H 16gb ddr4 2666mhz 1tb 970Evo
Razer Blade Stealth 12,5 2016 i7 7500U 8gb ddr3 1866mhz 500gb 970Evo
MacBook Pro 13 mid 2012 i5 3210M 12gb ddr3 1600mhz 500GB HDD
Razer Core V2 rtx 2070 Black 2040mhz Boost clock
Previous setting: rtx 2080ti Asus Turbo, rtx 2080 xc gaming, rtx 2080 Fe, Zotac Mini 1080ti, Evga 1080 FTW2 gaming.
Dual Monitor Predator XB241YU 165Hz 1440p, LG l24UD58 60Hz 4K
Portable Monitor Magedok 1440p HDR 60Hz usbA/C monitor


ReplyQuote
(@akiyam)
New Member
Joined: 11 months ago
 

Difference between Mantiz and VisionTek is that Mantiz is made of aluminium and VisionTek is made of steel.

"Trying new things makes you more even more engineer"


ReplyQuote
(@akiyam)
New Member
Joined: 11 months ago
 

I did not now it is fixed. There was one letter too much 😎

"Trying new things makes you more even more engineer"


ReplyQuote
nando4
(@nando4)
Noble Member Admin
Joined: 3 years ago
 

@akiyam ,pls check the first 4 images you posted. They may be private as appear simply as a minus for me.

eGPU Setup 1.35    •    eGPU Port Bandwidth Reference Table

15" Dell Precision 7510 (Q M1000M) (6th,4C,H) + GTX 1080 Ti @ 32Gbps-M2 (ADT-Link R43SG) + macOS 10.13.6 & Win10


ReplyQuote
Biiz
 Biiz
(@biiz)
Active Member
Joined: 10 months ago
 
Posted by: nando4

@akiyam ,pls check the first 4 images you posted. They may be private as appear simply as a minus for me.

I see the minus as well. Would you mind using engine valley and engine heaven? Those are free to use benchmark softwares.

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
(@akiyam)
New Member
Joined: 11 months ago
 

I check photos without logging in... I see them in full pictures. Do anybody has any thoughts where is the problem? Site moderator would be nice to check it up ... 

Enige valley and engine heaven I have been thinking to do soon when I have free time 🙂 Maybe I put that to my to-do list :p

"Trying new things makes you more even more engineer"


ReplyQuote
(@chris_chrispy)
Active Member
Joined: 9 months ago
 

Ill do have the same problems with the pictures. I cant see them.

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
odin
 odin
(@odin)
Trusted Member
Joined: 1 year ago
 

Same issue for me with most of the photos. Maybe use imgur.com?

LG Gram 17 | Sonnet Breakaway Box 550 | Asus Strix RTX 2070 OC Edition | Win 10 Pro 1903 + Fedora 31 Dual Boot
Build Link


ReplyQuote
Wolfie_011
(@wolfie_011)
New Member
Joined: 7 months ago
 

I am setting up similar setup with hp omen, is it simple to install all 3 graphic drivers?

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote