ADT Link R43SG weird detection problem
 
Notifications
Clear all

ADT Link R43SG weird detection problem  

  RSS

Atadam
(@atadam)
Active Member
Joined: 7 months ago
 

Hi,

I got my setup two months ago with a 5700 XT on R43SG and it was working but with some flaws.

PC doesn't detect eGPU, PSU working, GPU working, dock working normally with 2 green lights ( D1 and D2 ) but no detection on device manager. If i play a little with m2 cable connecting dock to pc ( bending cable around, usually dockside head) after Windows booted, GPU is detected but gives me error 43. 

This is either a PSU problem, or faulty cable problem or both? Or motherboard?

What i already tried:

- Made PSU permanent on changing SW1 (1 to 2 ), SW2, SW3 tricks, pretty much all the tricks @nando4 suggested on other threads.

- Unplug all cables and replug them.

- This is a Clevo model so BIOS settings are very restricted, no modded BIOS on internet.

Already checked general error guide about m2 and there is also this guy with same problem.

 

Untitled2
Untitled
Untitled1
This topic was modified 1 month ago

CLEVO W670RCQ
i7-6700HQ, 16 GB DDR3 Ram, AMD 5700 XT on 32 Gbps x4 3.0 ADT-Link R43SG M2 eGPU Adapter


ReplyQuote