AMD RX 5700 doesn't display to internal screen
The egpu setup (i7-1065G7, Rx 5700) I have works perfectly except that the internal display is not detected by the system. How do I enable the internal display? (Note: igpu is not detected in windows when egpu is plugged in)
Lenovo S340-15IIL (1080p internal display)
1280 x 1024 external LCD display (via hdmi)
12 GB DDR4
512GB intel nvme ssd
1TB seagate hdd
Latest Windows 10 version (at the time of post)
Latest AMD adrenalin drivers (at the time of post)
@ethan_su, I'm not familiar with the Beast but you may be able to disconnect at the Beast and then boot, and plug it in and see if it identifies the additional GPU. This is what my setup does every time I boot because I am on TB3.
Don't hotplug at the m.2 slot, although I believe that is possible too with the right setup.
Check this thread which may have a solution for you: https://egpu.io/forums/builds/2012-14-dell-e6430-gtx6704gbpsc-ec2-pe4c-2-1a-win8-1/
That post made think about something, once you have a working m.2 eGPU and you want to use an external monitor, is it better to plug the hdmi on the laptop slot or on the card slot? Is there any difference?