Asus K55VJ Egpu guide. Ok !
Hello to everyone. Installation made device: Asus K55VJ 6 Gb ram i5 3230m processor 240 Gb AData Su650 Ssd Nvidia 635m and Intel Hd 4000 Gtx 1060 400W PSI with 6-pin PCIe output Beast Mini PCIe v8.5c adapter. Windows 10 64bit Pro Warning: You should back up your friends data to setup on this device! Friends using Windows 7 can switch to formatting. If the windows 10 version you use is Gpt style, you cannot get an image from the built-in screen. If your version of Windows 10 is in MBR style or you are using Windows 7, you will be able to take images from the built-in screen To understand this, enter the device manager and click on the features of your hard disk. Switch to the Units tab and click the fill button below. You can see your hard disk boot in Partition Style. Mbr or Gpt. If Gpt is a new windows 10 boot from rufus with Usb memory, print as Uefi (Csm and Mbr). Restart the computer. Enter bios with F2 and do Secure Boot off. Then turn off Fast Boot and turn on Csm. Save the settings and restart the computer. Turn off the computer by pressing the power key. Insert your USB memory and start the computer. Enter the bios again with F2 and save your USB memory to the first boot tab and save. At the time of Windows installation, delete and re-create all harddisk partitions. The boot style does not change without deleting the entire hard disk. Select and format the disk to load and start the windows installation.
Once the download is finished, remove the USB memory when the PC restarts. Download the Driver Booster program when you get to the desktop. Update all your drivers with this program. Close the PC. Set the small tab on the Beast dock to the ATX mode and the other tab to OFF. The graphics card will start automatically when you start the PC. Make the PC connections to your Egpu adapter. Start the PC. For the internet I have used the Asus n10 usb mini wifi adapter. Enter device management and the system devices are located in: Disable the Xeon processor E3- 1200 v2 / 3rd PCI express root port. Thus, the 635m graphics card will be disabled. Then install Nvidia's latest driver for your graphics card. Download his app that our friend and run nvidia error 43 fixer. https://egpu.io/forums/expresscard-mpcie-m-2-adapters/script-nvidia-error43-fixer/ Now you can make your 3D settings by entering the Nvidia Control Panel. Select the Gtx 1060 in the Physx Tab. Check for Physx Separation. Now you're ready to play. I'll add pictures later. Achievements.
Asus K55VJ AData 240 Gb Ssd Samsung 6 Gb 1600 Mhz Ram Nvidia Gtx 1060 Platoon 400W Psu. Beast Mini PCIe Dock.