2014 15" Asus X555FL GT930M + GTX960@4Gbps-mPCIe2 (EXP GDC 8.4d) + Win10 [SoulKnot]
@Augusto do your research at what is MBR and GPT and how to install it.Use THIS site do download the windows(it's legit).Start reading the posts here,there are many workarounds on how to make it work.What i can tell you(and i really don't need your opinion on it) is that you are limited to WINDOWS 10 ANNIVERSARY UPDATE(as of now),if you have hotplug enabled you can mange to install 378.92 driver(see the post on how to),without hotplug 375.70 and that's it.If you expect to have all the latest and greatest better start saving for a new PC.Everyone start cutting support for mPCIE/Express Card setups so most likely there will be no more solutions.
Can someone explain in more detail how this step by step works because I have this error 31
However, for my lenovo 80h1 notebook to recognize the eGPU I have to do the following step by step ...
1- Start with the wi-fi card and access DIYeGPU-Setup-1.35.
2- Remove the wi-fi card and connect the cable with the eGPU EXP GDC connected.
4- run step by step as directed by Nando's link >> <<
Only then can I make the system recognize the eGPU EXP GDC with GTX970
Then error 31 happens to me. So if possible I would love to know this step by step,
"So, modding the bios file and re-flashing it did the trick."
Here is a video of the process I have to do to identify the eGPU and I still have this error message below
This device is not working properly because Windows cannot load the necessary drivers for this device. (Code 31)The driver trying to start is not the same driver as the video adapter that did the POST test.
If someone can give me a light I appreciate it !!!
I'm using DIY eGPU 1.35 too and all tries the error 31 happens
Modify my BIOS is really the most difficult alternative to me