Bought a new corsair VS 450W psu and it works flawlessly wit the new adapter, I've updated my guide too. It's running stable and haven't experienced any problems since 3-4 days.
I can say that this is really stable now. 
When I turn on certain lights or turn off certain equipment the pc crashes (video tdr failure nvlddmkm.sys).I did several try crash when I operate the extractor hood of the bathroom, or the automatic shutters or the air conditioners.I bought a pair of ferrite bead but the problem does not go away.
I also tried to cover the power cables with aluminum foil, but the problem does not go away.
I have tried both with ferrite and with aluminum. I did like 2 other users on this forum.
Below I put their pictures.
To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.
.
I also tried to cover the power cables with aluminum foil, but the problem does not go away.
Suggest test a PCE164P-N03 inexpensive mPCIe adapter with better static insulation and/or a different PSU with power filtering.
eGPU Setup 1.35 • eGPU Port Bandwidth Reference Table
2015 15" Dell Precision 7510 (Q M1000M) [6th,4C,H] + GTX 1080 Ti @32Gbps-M.2 (ADT-Link R43SG) + Win10 1803 // compares M.2 vs TB3 performance inc unoptimized H-CPU BIOS [build link]
I also tried to cover the power cables with aluminum foil, but the problem does not go away.
Suggest test a PCE164P-N03 inexpensive mPCIe adapter with better static insulation and/or a different PSU with power filtering.
Thanks for the reply
1) PSU: corsair VS550 is it okay?
2) is it possible to work / play with the PCE164P-N03?
is this ok? Amazon PCE164P-N03
To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.
.
I'm going to try ferrite beads tomorrow (hopefully) but wrapping the interconnect cable with aluminum foil worsened the problem by a lot! It now crashes immediately when starting furmark instead of crashing after ~5 minutes. Has anyone encountered the same? Or can anyone explain as to why that would happen?
Laptop: Dell E6440
GPU: GTX 1050Ti
w/: EXP GDC v8.4 mPCIE
and a: Thermaltake Litepower 650W PSU
@kenan_1099, u got solution,, i hve been experienced same situation...if turn on off fan switch room in my house,, it will get BSOD and crashed egpu
i use molex connector from power supply to egpu power source.. if i use 6 pin male 6 pin male it will crashed imiidiately in 5 sec running furmark kombustor..i have been experienced that only the switch fan room problem cant solve until now
To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.
.- @amirul_aiman, actually I did get ferrite beads and they did nothing. However, I do have a PC with an mpcie motherboard and I tested it with the exp gdc and it worked flawlessly, so I think the issue is from my laptop.
Laptop: Dell E6440
GPU: GTX 1050Ti
w/: EXP GDC v8.4 mPCIE
and a: Thermaltake Litepower 650W PSU
In my case (Lenovo Ideapad 320-15IKB, EXP GDC 8.0 GTX 1050 Ti 400W PSU windows 10 pro 1909) i have same troubles with screen freezing, reboots and black screen and restore with TDR error when clicking ligts switches, freezer restarts e.t.c.
1. I bought a cheap UPS and waited for it to be fully charged
2. I attached both a laptop and PSU to it. (only PSU didn't solve the problem)
After that there were only problems with suddenly black screen and restore with TDR error.
3. So i go to the registry HKLM\System\CurrentControlSet\Control\GraphicsDrivers and set key TdrLevel=0 (disable TDR)
since then 3 weeks everything is fine
hope this helps someone
Lenovo Ideapad 320-15IKB (80XL)
EXP GDC 8.x
Nvidia GTX 1050Ti