[GUIDE] error 12/43 & other detection, bootup, stability & performance issues
 
Notifications

[GUIDE] error 12/43 & other detection, bootup, stability & performance issues  

 of  15
  RSS

(@onepawk2)
New Member
Joined: 2 weeks ago
 

Trouble with exp gdc

Materials:

dell 220w PSU

gdc beast 8.x to mpci-e (wifi port is ngff but ordered a mpcie to ngff ribbon adapter)

evga gtx 650ti boost (checked the bottleneck with e7240 and it was under 1%)

 

Followed the instructions in the booklet for bios

-Uncheck onboard NIC

-Uncheck Integrated NIC

-Uncheck wake on wlan

Changed the BEAST to ATX power always on, and tried both timings 7s and 15s

I either get a rebooting black screen never gets to logo or if try to plug in the beast after the logo it gives me a black screen saying "no boot sequence detected"

 

Im thinking Nando's DIY eGPU setup might work? 

Also do I absolutely need to use the 6pin power on the graphics card WITH the 8 pin plugged into the beast? (newbie question)

 

Thanks..

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
(@hugo_cesar_paduan)
New Member
Joined: 2 weeks ago
 

ACER ASPIRE VX5 951G, the eGPU is Exp GDC Beast v8.5, the graphic card is 1660ti

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
(@alejandro_tejada)
New Member
Joined: 1 week ago
 

I recently bought an external adaptor for my graphic card via mPCIe. I connect all to my computer and try to star windows but it shows me a blue screen saying that "ACPI BIOS ERROR". I have been browsing a lot for the internet but don´t find anything for a fix that.

The laptop is an HP 15-d006es (but I have changed the CPU to an i7-3630QM and I have added 4GB more of Ram)

BIOS is an InsydeH2O v3.7 F.1B

The Graphic card is an AMD Sapphire R9 380X Nitro Dual-X OC 4GB GDDR5 (I connect it to an external monitor because I read that AMD only found in external monitors and not in the same monitor of the laptop)

The adaptor is an EXP GDC Beast 8.5c

Thank you in advance

Hp 15-d006esbut whit i7 3630qm and 4GB more of ram


ReplyQuote
(@tamim_mahmud)
New Member
Joined: 2 days ago
 

After the first install I ran all the games with high settings and it reached 60 fps in all. But after a while in the middle of a game suddenly the fps dropped below 20 at the same graphics settings. And now my CPU runs at 100% while the GPU don't and their is a process called Service Host:Diagnostic Policy Services which starts when ever I launch a 3d application. I dont't know if the GPU is bottlenecking my CPU. And if it does why the games were running smoothly before?

 

My Notebooks Specs:

Processor: core i-5 6200u

RAM: 8GB DDR4

dGPU:GTX 920m (Disabled)

OS: Windows 10 Pro 64bit (build 18362)

Exp Dock: 8.5 beast(m.2/ngff version)

 

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
Daemon53
(@daemon53)
New Member
Joined: 2 days ago
 

Hi Friend

I wanted to make e gpu to improve the performance of my computer and the result was frustrated I encountered the code 12 error can you help me?

My system information:

HP Pavılıon G6 2212-et

8 gb ram 

120 gb ssd

İ gpu-intel grapchis 4000

D gpu-Amd radeoon hd 7670 m

E gpu -Msı Rx 570 Armor 8 GB OC

EXP GDC

DAEMON53


ReplyQuote
 of  15