[GUIDE] error 12/43 & other detection, bootup, stability & performance issues
 
Notifications
Clear all

[GUIDE] error 12/43 & other detection, bootup, stability & performance issues  

 of  67
  RSS

Joao Volpato de Araujo
(@joao_volpato_de_araujo)
New Member
Joined: 4 weeks ago
 

@nando4, my laptop has a GeForce 920M 2G video card, and recently this error 43 appeared out of nowhere, and I've tried everything, EVERYTHING and it didn't work, now with your tips the error "fixed it" and right after I restarted the computer the error came back , I don't even know what can be

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Peter Keri
(@peter_keri)
New Member
Joined: 2 weeks ago
 

I have an HP Pavilion 15 Laptop (AB289SA) with internal HD520 graphics.

The wifi card is in an M.2 slot so I bought the EXP GDC with the NGFF cable.

I have found that the computer won't even switch on when the cable is installed instead of the wifi card.  The screen does not even come on to show me an error message.  The only signal I get is the capslock key flashing 5 long, then 3 short blinks.

I took the cable out and put the wifi card back in and the laptop again worked as normal. Does anyone know what I could try to fix the problem?

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Marcos Falaschi lol
(@marcos_falaschi_lol)
New Member
Joined: 1 month ago
 

Ola all right? I would like to apologize for my English, I used the google translator.

already have a good time I'm trying to make my egpu work without success, I'm using the notebook xps 14 z with 1060 gtx and source 500 w and the DIY EGPU I bought on ebay

I can only connect the adptardor on the pci exit of the wifi card if I cheat the note ai I go into the setup here i have and type a bios but the config does not save with it and Enter the note and I see the palca in the manager, ai I wanted a way to start the note normally because of this jeiot that faco has many errors in the driver
I use this program here DIY eGPU Setup 1.35 so it does not save the config and does not remove the blockeo from whitlist, all ves I have to give bot with the wifi sign i enter the setup ai change it by the adptador desativo to another board just leave the hdgraphics and soon normally so i'm afraid to burn the exits with this take and put. the story ends with the board recognized with errors and i can not install any driver because dis that the hardware is not compatible.

https://ibb.co/5F8vkML

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
kekmasta
(@kekmasta)
New Member
Joined: 1 week ago
 

hi all.

 

my graphics card NVIDIA RTX 2070 is not showing up in my device manager. It turns on / off when the pc is on / off. It is powered by a 550W PSU and uses an ADT link r43sg M.2 adapter.

My windows version is WIN10 1909(18363.1139)

My NVIDIA driver version is 451.48.

pictures of my setup

https://ibb.co/02qz2Pv

https://ibb.co/yW1v58X

any help pls?

This post was modified 1 week ago

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
DyenYoung
(@dyenyoung)
New Member
Joined: 1 week ago
 

Hello i have a Lenovo 14' ideapad 520s with an slot for an nvme m.2 slot so i bought a ADT-R43SG and gtx1650s i have followed the instructions on how to mount the gpu and the adapter to my laptop but when i boot it up and i check device manager the gpu adapter is not detected. hoping someone can help

Update i i have finally got my card read after reading some fixes on the forums but i cant seem to use it my games wont detect it and i dont have an nvidia control panel

This post was modified 1 week ago

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Ängel Fuentes
(@angel_fuentes)
New Member
Joined: 1 week ago
 

hello

 

my exp gdc 8.5c, when i turn on my laptop it does not turn on the graphic, and the laptop same does not turn on.

only disconnecting the hdmi cable turns on my laptop

help me in knowing if my exp gdc is damaged and it is repaired

 

thanks

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Ariffal J
(@ariffal_j)
New Member
Joined: 4 days ago
 

Hello, all. I hope you all are well. Long story short I just bought a EXP gdc beast version 8.5, GPU 1650super from zotac, and a PSU Super Flower 500W 80+ Gold
I want to use it on my old laptop Asus x454LJ with the following specifications

Processor: Intel Core i3-5005U 2.00GHz
Ram: 2 + 8 1600MHz = 10GB Total
Default VGA = Intel HD 5500 & Nvidia 920M

I have followed step by step to use this gdc exp. I also removed the driver for my Nvidia 920m using DDU, then I tried booting using exp gdc, it was all safe until when I looked at the device manager, it didn't display and detect anything, even though there should be a device with the name "Microsft Basic Display Adapter" on my case it doesn't exist. and when I looked in the tab "Other Devices" there was a device called "3D Video Controller" there, I thought it was my exp gdc device, and I tried to install the driver for my 1650 super and it didn't work, then I thought maybe it was is my 920M device and it's true, when I tried to install the driver for my 920M the device changed its name to "GeForce 920M". How do I get rid of my "GeForce 920M" permanently and if my 920M has been deleted then will the EXP GDC be detected? someone, please help me out. Thank you 🙂

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Frano356
(@frano356)
New Member
Joined: 1 day ago
 

Wish I could share in the success stories but I've Ben here for about 9 hours trying to get my gtx 1060 3gb to work to no avail. I've tried the. Bat file for the error 43 fix. It worked the first ever time I tried it but then upon attempted installation of 385 drivers I got a blue screen saying there was an error and they're just collecting some data and Will restart I tried the DDU after that thinking my windows 10 Intel drivers were conflicting. But after that I csnt get the. Bat file to work and I keep getting a blue screen whenever I try to install any Nvidia drivers. I've tried 456 and 386 Nvidia driver so far. Attempting to beast egpu on a Samsung NP470R5E-K01UB. 12gb ram 64bit windows 10 128gb ssd

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Thịnh Nguyễn Văn
(@thinh_nguyen_van)
New Member
Joined: 2 weeks ago
 

My egpu used for 20 to 30 minutes will turn off external display but the sound will still run on laptop. Is that by the PSU and give me some solutions

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
 of  67