Notifications
Clear all

mxm to m2 nvme adaptor  

 of  2
  RSS

Saltius
(@saltius)
Active Member
Joined: 1 year ago
 

https://item.taobao.com/item.htm?spm=a230r.1.14.11.5b9f259cKUGHDk&id=607393772035&ns=1&abbucket=3#detail

The seller claims that his cards can be used on clevo X7200/X8100(needs clover)/P270WM/P370EM/P370SM/P375SM/P570WM/P570WM3(needs bios modification)P870DM/P870DM2/P870TM, MSI 16L1/GT60/GT72/GT73/GT75 and alienware M18R2 to give users an extra nvme SSD slot.
Checking its trade history, I found some buyers. All these buyers only bought it just for their nvme SSDs. None used it for eGPU. So I have some doubt about its compatibility with eGPU.

A pity that now the world is in an epidemic period during which international shipping is crippled.
Otherwise I want to test it with Adt R43SG to see whether a 32Gbps connection directly to CPU could be made.


 

--------------------Updated info April 22nd-------------------------------------------

Contacted the seller who apparently owns a clevo DTR.

He told me that this card may not be used on clevo platforms for eGPU.

I guess that has sth to do with some whitelist things in clevo bios

On the other hand, he suggested MSI laptops which have MXM slots could have a try.

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Adrian Mart
(@adrian_mart)
New Member
Joined: 1 year ago
 

@saltius, please keep me updated if you can,id like to try the same modification in my aio

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
E najor66
(@e_najor66)
Active Member
Joined: 1 year ago
 

I have ordered one, I will test it on my dell precision m6800 for eGPU compatibility when it arrives.

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Patryk93
(@patryk93)
Active Member
Joined: 8 months ago
 

dude did you have any luck with this ? 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
E najor66
(@e_najor66)
Active Member
Joined: 1 year ago
 

@patryk93, It arrived today and worked plug and play. pic 1 pic 2

 

This post was modified 7 months ago

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Patryk93
(@patryk93)
Active Member
Joined: 8 months ago
 

@e_najor66, did you check with GPU-Z or hwinfo how many PCI-E lanes are you getting? 

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
E najor66
(@e_najor66)
Active Member
Joined: 1 year ago
 

@patryk93, I got the PSU I will be using for testing today, but I need the 24 pin to 2 6+2 pin adapter before I can. I will post the info when I have it.

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
theunleet
(@theunleet)
New Member
Joined: 6 months ago
 

@e_najor66, Let us know your results! I thought I had a NVME port under my X70-A's Motherboard but it is msata. I might be able to use this if you are getting at least 3.0 x4 lane speeds like R43SG(I bought one and this would enable me to use it.)

 

EDIT: I bought one, it was cheap enough. I have an MXM3.0b slot where my 770m dgpu is. I should be able to use the R43SG in the NVME slot. How do you power this board??

This post was modified 6 months ago

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
theunleet
(@theunleet)
New Member
Joined: 6 months ago
 

Watch out when you order, you pay for the item, then you pay for shipping(Only in China?). And then once it gets to some warehouse you have to pay again for international transshipment service. Paid ¥18.00 for "Shipping" then another ¥85 for the transshipment service after it reached some warehouse.

 

EDIT: Out for delivery today. My MXM port is spring-loaded with a copper heatpipe heatsink CPU / GPU cooler fan combo over the top. Might have to get creative here as part of the heatsink screws into the CPU and GPU, dont need heatsink on this adapter board.... just CPU.

This post was modified 5 months ago

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
anhxa100
(@anhxa100)
New Member
Joined: 1 year ago
 

i have Rev 9.0 V2

image

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
 of  2