Please tell me about EXP GDC HDMI cable ...
 

Please tell me about EXP GDC HDMI cable extension, please.  

  RSS

 KT
(@kt)
New Member
Joined: 8 months ago
Posts: 2
Dec 24, 2018 12:47 pm  

Currently it is used in the configuration of Clevo P650SE + EXP GDC 9.0b (NGFF) + ELSA GTX 1080 SAC.
Since I carry the PC at work, I plug and unplug the NGFF HDMI cable from eGPU.

I was afraid of the trouble of the HDMI cable / connector, so I thought about relaying with the extension cable.
Although I prepared an HDMI cable, the GPU's fan rotates although it is connected, but the PC side does not recognize the GPU.

Is the type of cable used for extension too bad? Will internal wiring change depending on HDMI version?

please teach me.

(PC) - (NGFF) - (HDMI Male to Male conversion connector) - (HDMI cable) - (EXP GDC)

<HDMI conversion connector>

HDMI HighSpeed ​​with ETHERNET

<HDMI cable specification>

HDMI HighSpeed ​​with ETHERNET

4K / 60p compatible
4K / HDR compatible
18 Gbps compatible
YCbCr 4: 4: 4 correspondence
Ultra HD Blu-ray ready
BT.2020 compatible
HDCP 2.2 compatible
ARC (Audio Return Channel) compatible

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
Topic Tags
nando4
(@nando4)
Noble Member Admin
Joined: 3 years ago
Posts: 1887
Dec 24, 2018 12:50 pm  

Cannot advise adding an extender to the EXP GDC 9.0b since it already has Gen3 signalling issues. Instead, suggest using ADT-Link extenders and eGPU adapters as posted at:

https://egpu.io/forums/expresscard-mpcie-m-2-adapters/clean-m-2-build/#post-50022

eGPU Setup 1.35    •    eGPU Port Bandwidth Reference Table    •    Several builds
2015 15" Dell Precision 7510 M1000M + GTX 1080 Ti @ 32Gbps-M2 (ADT-Link R43SG) + Win10


ReplyQuote
 KT
(@kt)
New Member
Joined: 8 months ago
Posts: 2
Dec 24, 2018 1:18 pm  
Is it to connect the NGFF cable (connector) of the eGPU from the outside of the PC by mounting the M.2 NVMe extension cable (extender) on the PC?
I did not know there was such a useful thing.

Thank you very much.
 

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote