I've been trying to get an angled connector since I'm having trouble putting everything together in a custom case, so I bought an angled 8 pin adapter but it doesn't fit the exp gdc female 8 pin molex. I didn't know there were different kinds of 8pin power molex plugs so I just got the regular PCIE 8 pin angled adapter.
Does anyone here knows the name of the 8pin molex used in the EXP GDC?
Thanks in advance
To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.
.
Were you able to find an adapter? I am also looking for one. Have you also tired an angle HDMI adapter? Thanks
To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.
.
The 8-pin front face connector is used for a Dell DA-2 PSU input. It is not pin compatible with a PCIe 8-pin power connector. Can see it's pinout at:
https://egpu.io/forums/psu-cables/us3-dell-da-2-pcie-splitter/
You could instead use the side 6-pin PCIe pin output connector. While designed for output, it is all just wired back to the same 12V and GND that drives the slot so can be an input power connector.
eGPU Setup 1.35 • eGPU Port Bandwidth Reference Table
2015 15" Dell Precision 7510 (Q M1000M) [6th,4C,H] + GTX 1080 Ti @32Gbps-M.2 (ADT-Link R43SG) + Win10 1803 // compares M.2 vs TB3 performance inc unoptimized H-CPU BIOS [build link]
Thank you! This is helpful. Do you know if using a HDMI extension cables is ok? I am trying the mount the GPU under my desk and the cable is not long enough.
To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.
.