late-2016 Macbook Pro 13" (Non-Touchbar) + GTX1070@32Gbps-TB3 (Aorus Gaming Box) + Win10 [Kim_KJD]^ // 3dmark comparison benchmarks
Setup is ridiculously easy with the Aorus Gaming Box. Only issue is figuring out the error 12 you get.
2016 Macbook Pro 13″ (Non-Touchbar)
Intel 540 (integrated graphics)
For this installation, I opted for a fresh install of Windows 10, just to ensure everything works correctly.
- Install Windows 10 via Bootcamp
- Update integrated graphics drivers (Intel 540)
- Visit NVIDIA and download drivers for GTX 1070
- Setup the Aorus Gaming Box and connect it to your Macbook
- Open device manager, wait until the GTX 1070 has been installed
- Run the exe you downloaded in step 3
- Once your in the setup, choose “Custom” setup and tick the remove existing drivers option
- When complete don’t restart, your gaming box is installed with the correct drivers, however it will show an error 12 in device manager.
- Disable port #10 – 9D19 (Mobile 6th/7th Generation Intel(R) Processor Family I/O PCI Express Root Port #10 – 9D19) in device manager.
- Unplug your Gaming Box
- When the Windows logo is displayed, plug your Gaming Box back into the port.
Installation is complete.
If I need to plug the Auros Gaming Box back into my Macbook at any time, I need to restart my Macbook and plug it in at the Windows splash screen.
I have attached my benchmark findings.
Needless to say, anyone with a Macbook, will be very happy with the Aorus Gaming Box.
Yes, there is fan noise. You can hear the fans for the PSU very faintly, mainly because the cord is so short you have to have the unit next to the laptop.
When you start using the card, note it only switches on when a program needs to use it, you’ll hear the card fan spin.
So there is noise and under load it can be loud.
The positive is that when the card is under it heaviest load, we’ll probably have headphones on anyway.
In my opinion, the Aorus Gaming Box would greatly benefit with a longer Thunderbolt 3 cable.
If it’s going to make a lot of noise, get it far away.
I’m not found it to work at all I’m afraid.
- I installed a clean version of windows 10 on bootcamp (via Mac Sierra)
- Launched into windows and updated all the windows and apple software
- Plugged in the aorus box and it appeared to be detecting it and installing something.
- Then restarted
- Now whenever it’s plugged in for boot or if I plug it in once windows loaded – it just crashes the machine. Either I get a blue screen of death or just the windows logo is shown and it freezes on boot.
I’m wondering if you used thunderbolt3-to-2 adapter to connect it with your MBP?
Hi KIM_KJD, Hi everyone
Thanks a lot for your guide. Any chance that this instructions will work on a late 2016 15″ MBP? Since it looks like a clean implementation and adresses my needs perfectly, I would like to try it as soon as my Aorus Gaming Box arrives.
@GiGi85, the 2016 15″ MBP requires a different installation process. Please refer to guides for your system, particularly by @theitsage:
thanks for the guide. Setup is stressing me out. Got it to connect with Mac OS but the benchmarks aren’t up to par, 200-400 scores on heaven and valley.
Im getting stuck on steps 4-5 for connecting the gaming box to win10 boot camp. When I connect the egpu to top tb3 port, it doesn’t detect properly so it doesn’t install the device in device manager. When I tried connecting to 2nd tb3 port, I see it begin to install the 1070 driver, but after a few seconds I get a blue screen and windows crashes.
i don’t know what I’m doing wrong
im running i5-7xxx, and 8gb ram
I have the following components:
– Late 2016 MBP 13″ | i5 2,0 GHz 8GB RAM
– Sonnet 550 eGPU Box
– NVIDIA GTX 1060 6GB
and followed the instructions from Kim_KJD from the first post exactly the same: fresh bootcamp install + bootcamp drivers, all updates (win itself + apple software) and some restarts inbetween. As soon as everything from the basic system was running and was up2date, I updated the Iris 540 driver (because Windows update doesn’t have the newest one available). One restart later, I plugged in the eGPU Box with the 1060, waited for the device manager to recognize and install it as a GTX 1060 and not as a generic video adapter, and THEN installed the newest NVIDIA driver with the checkbox “remove existing drivers”. Disabled the Port 10 (9D19) and THEN restarted.
Only thing I have to take care of is plugging the eGPU box in during seeing the Windows logo and not plugging it out during the running system.
Now I’m trying to get G-Sync running. Still have no clue so far how to achieve this though.