Asus ROG XG Station 2 [no graphics card detected]
 
Notifications
Clear all

Asus ROG XG Station 2 [no graphics card detected]  

  RSS

Invoker
(@invoker)
Active Member
Joined: 4 years ago
 

Hi guys,

I've a issue with my setup:

MacBook Pro (13-inch, 2016, Four Thunderbolt 3 Ports)

Asus ROG XG Station 2

ASUS GeForce 1080 ti

Initial setup steps:

  1. Bootcamp Windows 10 x64
  2. Update Intel Thunderbolt Drivers
  3. Install hot-plug tool and plug Asus ROG XG Station
  4. Update firmware V25
  5. Insert eGPU and update NVIDIA drivers
  6. Windows setup is OK, everything working
  7. Boot to Mac and run script & restart - everything working on Mac

Now, problem:

  1. Windows setup: not working anymore. After I'm plugging eGPU under bootcamp Hot Plug tool detecting enclosure, but status is "No graphic card detected".

Any suggestions on what should be done to make Windows setup working again ?

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
Invoker
(@invoker)
Active Member
Joined: 4 years ago
 

I've got:

Background services enabled.

Now back to Windows?

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote
goalque
(@goalque)
Noble Member Admin
Joined: 4 years ago
 

The automate-eGPU.sh -a mode is not supported on Macs released after 2015.

You should use apple_set_os.efi and the correct TB3 port.

automate-eGPU EFIapple_set_os.efi

Mid 2015 15-inch MacBook Pro eGPU Master Thread

 
2018 13" MacBook Pro [8th,4C,U] + Radeon VII @ 32Gbps-TB3 (ASUS XG Station Pro) + Win10 1809 [build link]  


ReplyQuote
Invoker
(@invoker)
Active Member
Joined: 4 years ago
 
Posted by: goalque

The automate-eGPU.sh -a mode is not supported on Macs released after 2015.

You should use apple_set_os.efi and the correct TB3 port.

This! It is working now, thank you.

Question: I have to use apple_set_os.efi method always? It is not a problem to connect USB-Stick, but just in case...

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

itsage liked
ReplyQuote
worldburger
(@worldburger)
New Member
Joined: 4 years ago
 
Posted by: goalque

The automate-eGPU.sh -a mode is not supported on Macs released after 2015.

You should use apple_set_os.efi and the correct TB3 port.

Is there a resource that shows you which TB3 port is correct for your MBP? (2016 15" MBP)

 

To do: Create my signature with system and expected eGPU configuration information to give context to my posts. I have no builds.

.

ReplyQuote