I have some problem: Razer Core X / Radeon VII / MacBook Pro 2019 / COH2 Crashes.
I have some problem, so I need some help.
i want to play Company Of Heroes 2, but it crashes after a few minutes.
but, disconnect eGPU and play with dGPU, it never crashes again.
another problem, when i turn off or sleep the MacBook pro, eGPU's fan spins full speed.
anyone who knows about this problem?
and, i think the COH2 has problem too. another game like dirt rally, factorio, Minecraft do not crashes with radeon VII.
Radeon VII fan speed problem is discussed in https://egpu.io/forums/gpu-monitor-peripherals/radeon-vii-egpu-fans-run-full-speed-in-sleep-mode/
I think it's a problem with the Radeon VII firmware. There's no solution except to get a different eGPU enclosure.
@gzx9755 Probably not. All you can do is report the problem. I'm not sure what the cause is. All we know is, of the AMD cards, only the Radeon VII has this behavior. The fans could be controlled by hardware, firmware, or software.
On the software side, does the same problem exist in macOS, Windows, and Linux? I think the problem is reported for both macOS and Windows so maybe it's not software.
If the fans are controlled by hardware, then there's not much to do except get different hardware. In this case, the Netstor HL23T-Plus eGPU box is known to not cause the problem with the Radeon VII. So, is the fault with the Razer Core X and other eGPUs or the Radeon VII? Well, there's many eGPUs that work fine with many graphics cards, and only one Radeon VII so it makes more sense to blame the Radeon VII.
hmm... why I Doubt my new MacBook, because I was used Lenovo Thinkpad P50 laptop. (Intel Xeon E3-1505M v5, non-ECC 32GB ram, Nvidia Quadro M2000M dGPU) with my Thinkpad, eGPU Radeon VII was worked without problems.
and, sadly, I cannot check by software. i do not have plan use Linux with my new macbook. and my linux machines do not has Thunderbolt3 port. in my macbook bootcamp, i Resolved other problems Except Error code 12 in device manager. i use bootcampdriver's custom bootcamp driver, tried eGPU.io's DSDT override guide but, i cannot resolve this problem so, The conclusion is i only can test in my Windows + Lenovo Thinkpad P50 model, and macOS + macbook Pro 2019.
i trying for resolve error code 12 in bootcamp windows, i think it cannot resolve. if i resolve this problem, i will report in this Post.
@ttamnogard That’s good to know. I will try the Radeon VII on a Windows laptop and latest Radeon drivers to see if that works better. During my tests with the Radeon VII when it first came out, the fan speed issue during sleep was present on all operating systems across different desktops and laptops.
I don’t know if any of this matters...
1. I am always plugged into my mac mini
2. I do NOT power off the core x
3. There was an update to AMD’s drivers. Due to some renovation work at home, the mini is offline at the moment. I also upgraded my monitor to a new Freesync 2 monitor and also scored a Sapphire Nitro+ 5700 XT. Since the Radeon Auto undervolt doesn’t do much and honestly I’m not playing with the settings, I may be wrapping up my testing with the VII.
I *do* still have the bug when I connect the VII to my MBP 2019.... but there are just too many variables.
i see your benchmark. congratulation 🙂
I'm so jealous of you to it works well without any problems.
@gzx9755 Thank you for the confirmation. This is a good sign either the Radeon drivers or Thunderbolt Software can manage the Radeon VII fans in suspend mode. Hopefully Apple can work with AMD to integrate these changes into their Mac firmware and macOS graphics drivers. Can you share the Intel Thunderbolt Software or Thunderbolt Control Center you’re using on the Thinkpad P50?
i remember, i don't use special tools. just intel thunderbolt tools. (it included in micosoft 10 or lenovo vantage? i don't know. sorry) i only use pre-installed thunderbolt tools.
my thinkpad P50 now in my home. and, i'll go to home when sep, 30. if i can do, i will check my software and report in this post for you. 🙂
i'm sorry to late.
my thinkpad P50's thunderbolt software is just intel thunderbolt software for windows.
software package version is 22.214.171.1240.
and, i use lenovo vantage update my thinkpad's thunderbolt software.
if you any another needs to me, please mention to me. thank you 🙂
p.s. i cannot mention to you in this post. if you can see another mentions, i tell you so sorry for many mentions.