Enclosure & Hardware Discussions
19V Akitio PSUs
 

19V Akitio PSUs  

  RSS

(@lucian_bartik)
New Member
Joined: 4 months ago
 

I acquired a Thunder3 from ebay that was modified according to a 9to5mac blog post/youtube video.   It killed a Radeon Pro WX 4100 and a Quadro P1000 instantly before I inspected the PSU and found a 19V 6.3A Gateway laptop charger.

Take if from me kids, don't use a high voltage laptop PSU with these externally powered enclosures.

Astonishingly there must at least few GPUs out there that are 19V tolerant and a few people who have gotten lucky with this poorly matched combination.

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


itsage and Yukikaze liked
ReplyQuote
may
 may
(@may)
Eminent Member
Joined: 3 years ago
 

Hello guys,

I am looking for dell da-2 power cord cable to wall. Anybody have a spare one? (EU)

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote
may
 may
(@may)
Eminent Member
Joined: 3 years ago

ReplyQuote
B Wesley
(@b_wesley)
Eminent Member
Joined: 5 months ago
 

The butt to the Dell DA-2 has the standard IEC320 "C13" plug fitting. 

 

You should be able to acquire any compatible cable in your market. 🙂 

(I *think* IEC320C13 to CEE7/7 )

Sys1: MITX Desktop in InWin Chopin
i5-4570 + 1060 6GB + PCIe 1x adapter (over USB3.0 copper)
Sys2: Dell 15 Latitude 3542
i3-4030U + 1060 6GB + mPCIe adapter for PCIe 1x (over USB3.0 copper)
Sys3:Dell 14 Inspiron E5450
i7-6500U + 1060 6GB + NGFF M.2 A/E --> mPCIe adapter
+ mPCIe adapter for PCIe 1x (over USB3.0 copper)
Sys4:Pending


ReplyQuote