Enclosure & Hardware Discussions
Thoughts Liquid Cooling in the Mantiz Venus?
 

Thoughts Liquid Cooling in the Mantiz Venus?  

  RSS

Lunchbox
(@lunchbox)
Eminent Member
Joined: 2 years ago
 

I  was wondering what peoples thoughts were on using a Liquid cooled card in the Mantiz Venus.  I know the fan size is only 80mm and most radiators are 120mm.  So cutting a bigger hole is one solution.  I however found this radiator https://modmymods.com/alphacool-nexxxos-xt45-full-copper-80mm-single.html.  This would most likely fit, but I don't know if it has enough area to cool the card.  Thoughts?  Perhaps using a hybrid card with an air cooler for part of it and this for the GPU might work?

2017 3.1ghz 15" MBP, 16gb of Ram, and Radeon 560 - Mantiz Venus EGPU with Silverstone SX800-LTI 800W power supply and Noctua fan - EVGA SC 1080TI - LG 34UC87M-B


ReplyQuote
Flint Ironstag
(@flint-ironstag)
Estimable Member
Joined: 3 years ago
 

Might also inquire about the Mantiz Saturn, which is built to accommodate liquid cooling.

MP 6,1 | 4c | d700
MP 6,1 | 6c | d500


ReplyQuote
w4d3
 w4d3
(@w4d3)
New Member
Joined: 2 years ago
 

Just a heads up most all in one water cooling loops are made with aluminium blocks and radiators. The one you linked looks like a copper one so if you added it to an aluminium loop it would cause corrosion. There mat be a bracket for the 80mm fan to 120mm radiator ( might still be better performance than air cooling).

Pending: Add my system information and expected eGPU configuration to my signature to give context to my posts


ReplyQuote